Setting Temperature And Operation Mode; Cable Clamp Bracket - Daikin LXE10E-A35B Service Manual And Parts List

2. Setting Temperature and Operation Mode

Operation mode
Operation
procedure
Functions

3. Cable clamp bracket

When it is operated on the trailer or railway chassis, be sure to fasten the power cable with
6
https://daikin-p.ru
Chilled mode
Set the operating Set the operating
temperature to the temperature to the range
range of +30 to -2.9° C of -3.0 to -10.0° C (+26.6
(+86 to +26.8<). to +14<).
Used to perform chilled Used to perform partial
operation, which frozen operation, which
proportionally controls proportionally controls the
the temperature inside temperature inside by
by means of the means of the sensor of
sensor of discharge air suction air temperature.
temperature.
The evaporation fan performs High-operation.
CABLE CLAMP
Operating temperature
Partial frozen mode
Set the operating temperature to the
range of -10.1 to -30.0° C (+13.8 to -
22<).
Used to perform frozen operation,
which turns the compressor ON or
OFF and proportionally controls the
temperature inside by means of the
sensor of suction air temperature.
The evaporation fan performs Low-operation.
Loop type
Frozen mode
cable clamp .