Download Print this page

Larson Electronics EPL-HB-150LED-PND Instruction Manual page 2

Class 1 division 1 & ii explosion proof 150 watt high bay led light fixture 10,000 lumens

Advertisement

WARNING
TO AVOID THE RISK OF FIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,
INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN ACCORDANCE WITH ALL
APPLICABLE ELECTRICAL CODES.
TO AVOID ELECTRIC SHOCK:
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
PRODUCT MUST BE CONNECTED TO A WIRING SYSTEM WITH AN EQUIPMENT-GROUNDING
CONDUCTOR.
TO AVOID EXPLOSION:
MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.
ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS
ATMOSPHERE.
DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE PRODUCT
NAMEPLATE.
DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR
DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.
ALL FASTENERS SHOULD BE PROPERLY SEATED.
The Larson Electronics EPL-HB-150LED-PND Low Profile High Bay pendant mounted light fixture provides operators with
a powerful and energy efficient alternative to traditional hazardous location luminaries. LED technology and compact
design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures.
For supply connections, use wire rated for at least 110°C
Recommended mounting height is 25-40 feet.
MOUNTING
NOTE: Pendant mounting option requires conduit be
supplied by
the
variety
of
mounting options.
ceiling
mounting,
cable mounting. Each mount is interchangeable and can
be switched easily from back of light. Remove the back
cover plate of light to reveal the driver and line wires. Feed
line wires from light through back cover if not already and
replace cover plate. Thread cable through mount and attach the
mount to the back cover plate utilizing the included hardware.
Once attached, fixture is ready to be mounted to the surface
or conduit. Seal off any unused NPT ports.
Larson Electronics, LLC
installer.
This
Mounting
pendant mounting,
Phone: (800) 369-6671
fixture
offers
options
include
wall
mounting
and
Fax: (903) 498-3364
EPL-HB-150LED-PND
a
www.larsonelectronics.com
2 of 4

Advertisement

loading