Kidde P4010ACLEDSCO-2 User Manual page 18

nOte:
The battery activation is a one-time feature. After activation, the battery cannot be turned off, and can
only be discharged at the end of unit life. If the alarm is removed from the mounting plate, the backup battery will
remain active. See Permanently Disable Alarm / Discharge Battery section.
AC wired Interconnect Model Capability
This model has AC hardwire interconnect capability. When one hardwired interconnect unit sounds an alarm, all other
compatible hardwire or interconnected units will also alarm.
•
The following models can be interconnected using the standard AC wiring interconnect: 1235, 1275, 1276, 1285,
i12020, i12020A, i12040, i12040A, i12060, i12060A, i12080, i12080A, i4618, i4618A, i4618AC, KN-SMFM-I,
RF-SM-ACDC, PE120, P12040, Pi2000, Pi2010, KN-COSM-I, KN-COSM-IB, KN-COSM-IBA, KN-COPE-I,
KN-COPE-IC, KN-COB-IC, KN-COP-IC, SL177i, SLED177i, HD135F, SM120X, CO120X, i12010S, i12010SCO,
P4010ACSCO, P4010ACSCO-W, P4010LACS-W, P4010ACS, P4010ACS-W, P4010ACLEDS-2, P4010ACLEDSCO-2.
The alarm is now activated! After installation / activation, test your alarm as described in Operation and Testing section.
wArnIng: FAIlUre tO prOperly InStAll And ACtIVAte tHIS AlArM wIll preVent prOper
OperAtIOn OF tHIS AlArM And wIll preVent ItS reSpOnSe tO FIre HAzArdS.
18