Adjust Valve Postion To Surface-Cleaner; Start The Engine - MAKINEX DPC-2200 Operator's Manual

4. ADJUST VALVE POSTION TO SURFACE-CLEANER

4.1 Make sure the valve is
pointing to the Surface-
Cleaner position (as shown
on the right) before starting as
this makes sure pressure is
constantly released before you
start the engine and during initial
running.
RISK OF EYE INJURY. SPRAY CAN SPLASH BACK OR PROPEL OBJECTS
 Always wear safety goggles when using this equipment or in vicinity
 Before starting the pressure cleaner, be sure you are wearing
WARNING
 NEVER substitute safety glasses for safety goggles.

5. START THE ENGINE

Refer to your Briggs and Stratton XR 950 Engine Operator's manual for more
details
supply connected and turned on. Damage to
DPC-2200 USER MANUAL
of where equipment is in use.
adequate safety goggles.
***IMPORTANT***
DO NOT run the pump without the water
equipment resulting from failure to follow
this instruction will VOID WARRANTY
Page 19 of 38