Operation; Oil Level Check - MAKINEX DPC-2200 Operator's Manual

OPERATION

OIL LEVEL CHECK

CAUTION
1. Clean area around oil fill and remove oil cap.
2. Check the dipstick to ensure there is enough
oil.
3. If there is not enough oil, using oil funnel
(optional), slowly pour contents into oil fill
opening.
4. Replace oil fill cap and tighten.
5. For pump oil, see 'CHECKING PUMP OIL
LEVEL' in maintenance section of this manual.
NOTE: IMPROPER treatment of pressure
cleaner can damage it and shorten its life.
DO NOT attempt to start the engine before it
has been
recommended oil. This may result in an
engine failure.
NOTE: Refer to XR 950 Manual for more in-depth instructions
NOTE: New machines will be pre-oiled from MAKINEX with:
Power Equipment Engine Oil – SAE 10W-30, API SJ
DPC-2200 USER MANUAL
Check the engine oil level with the engine stopped and in a
levelled position
properly serviced with the
Page 15 of 38