Connect Garden Hose To Water Inlet Connection - MAKINEX DPC-2200 Operator's Manual

3. CONNECT GARDEN HOSE TO WATER INLET CONNECTION

3.1 Before connecting the garden hose to the water inlet connector, inspect the
filter
3.2 Run water through your garden hose for 30 seconds to clean out any debris
3.3 Release any pressure from spray gun by pulling the trigger.
3.4 Connect the garden hose to the water inlet connector (not to exceed
15m/50ft in length and with the inner diameter of hose no less than 13mm).
3.5 Turn on water
FILTER
DPC-2200 USER MANUAL
***IMPORTANT***
DO NOT siphon standing water for
the water supply. Use ONLY cold
water (less than 37°C/100°F)
Page 18 of 38