Table of Contents
Advertisement
Reducing Edge Distortion
When using a television for your PC's display, you may see some edge distortion
on the left and right side of your television screen. This effect depends on your
television and the PC application you are running.
To reduce edge distortion, you can increase the TV display's horizontal size.
To Increase the Horizontal Size
1 Click Start.
2 Point to Settings, then click Control Panel.
3 Double-click Display.
4 Click on the Settings tab and then the Advanced... button.
5 Click on the ATI Displays tab.
6 Click on the TV button.
7 Make sure you're on the Adjustments tab.
8 Click on the plus (+) button under Horizontal Screen to increase the horizontal
size of the television display.
9 Click Apply to save the changes you have made.
You can also reduce edge distortion by reducing the TV's brightness.
To Change the Brightness
1 Click Start.
2 Point to Settings, then click Control Panel.
3 Double-click Display.
4 Click on the Settings tab and then the Advanced... button.
5 Click on the ATI Displays tab.
6 Click on the TV button.
7 Drag the Brightness slider to the left to decrease the brightness.
8 Click Apply to save the changes you have made.
Changing Display Configurations
If you move your computer to a place where you are using television display
only, make sure that you have the television display feature enabled; see
Enabling and Disabling the Television Display on page
5.
If you change your display mode to a higher resolution, TV display is disabled
beyond the 800x600 mode. If a television is your only display device and a
higher mode is selected, the display on your television will disappear. Try
pressing ESC or wait for 15 seconds to see if your display will return. If your
display does not return, you will need to connect a monitor to your computer to
re-enable television display.
7
RADEON™/RADEON™ VE Using Video In/Video Out
Advertisement
Table of Contents
