Advertisement
oPeninG SaFe For tHe FirSt tiMe
Follow REMOVING THE SAFETY INTERLOCk SCREW and BATTERY INSTALLATION on
pages 5-6 before proceeding.
Turn handle counter-clockwise
1
Enter the six (6) digit factory preset
2
passcode 1-2-3-4-5-6. (The lock will
beep two (2) times).
Within four (4) seconds, turn the handle clockwise.
3
Pull door open.
4
With the door open, turn handle counter-clockwise
5
and lock door bolts in open position.
Test passcode 1-2-3-4-5-6 several times before closing and locking door.
6
The lock will beep three (3) times if an incorrect passcode is entered.
If a mistake is made, wait thirty (30) seconds and repeat steps 1-6.
7
until it stops.
Warning
inStaLLinG tHe HandLe SPoKeS
Follow OPENING SAFE FOR THE FIRST TIME on page 7 before proceeding.
Locate two (2) additional spokes inside
1
safe and remove protective covers.
Screw spokes into the handle hub.
2
OPTIONAL
To prevent loosening, apply one drop of Thread Lock on the threads of each spoke.
NOTE: Thread Lock is not included. Purchase from your local hardware store.
8
Advertisement
Need help?
Do you have a question about the 7319DFB and is the answer not in the manual?
Questions and answers