Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (status light will
be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by holding the reset button for 5 seconds until status light is flashing rapidly
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Home Security >
Cameras).
7.
Ensure that the device is in pairing mode, with the status light flashing rapidly, and
tap "Confirm light is rapidly flashing".
Advertisement
