Filter Force Reset; Filter Type Change - Philips AC2892 User Manual

Filter alert light
status
A3 displays on the
screen
C7 displays on the
screen
A3 and C7 display
on the screen
alternately
1
Take out the expired air purification
filter according to the filter code
displayed on the screen, and gently
put the expired filter into the trash
bin (fig.z).
Note
• Do not touch the pleated filter surface,
or smell the filters as they have
collected pollutants from the air.
2
Remove all packaging material of
the new filters (fig.c).
3
Place the new filters into the
appliance (fig.f).
4
Touch and hold the reset button
for 3 seconds to reset the filter
lifetime counter (fig.{).
Note
• Cleanse your hands after changing the
filter.
Follow this
Replace the
NanoProtect filter
HEPA Series 3
(FY2422)
Replace the
NanoProtect filter
Active Carbon
(FY2420)
Replace both
filters

Filter force reset

1
Touch and
for 3 seconds to enter the filter force
reset mode (fig.|).
» Code (A3) of the NanoProtect
filter HEPA Series 3 displays on
the screen.
2
Touch and hold
force reset the filter lifetime of the
NanoProtect filter HEPA Series 3
(fig.{).
3
Code (C7) of the NanoProtect filter
Active Carbon displays on the
screen after the lifetime of the
NanoProtect filter HEPA Series 3 has
been reset(fig.}).
4
Touch and hold
to force reset the filter lifetime of
the NanoProtect filter Active Carbon
and exit the filter force reset mode
(fig.~).

Filter type change

1
Touch and
for 3 seconds to enter the filter type
change mode (fig.|).
» Code (A3) of the NanoProtect
filter HEPA Series 3 displays on
the screen.
2
Touch to select the filter code of
the new filter you will use (fig.).
3
Touch and hold
confirm the filter code of the new
filter (fig.€).
Note
• After you have selected the filter code
of the new filter using the
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
simultaneously
for 3 seconds to
for 3 seconds
simultaneously
for 3 seconds to
button,
EN
11