Supplied Accessories; Symbols Used In This Owner's Manual; Attaching The Base - Emerson LD320EM5 Owner's Manual

Supplied Accessories

Owner's Manual
Remote Control
and Batteries
(AAA, 1.5V x 2)
Screws packed with this Unit.
Model
LD320EM5
Note(s)
If you lose the Screws, please purchase the above-mentioned Phillips head Screws at your
●
local store.
If you need to replace these accessories, please refer to the Part Name with the illustrations
●
and call our toll free customer support line found on the cover of this Owner's Manual.
When using a Universal Remote Control to operate this Unit.
Make sure the component code on your Universal Remote Control is set to our brand.
●
Refer to the instruction book accompanying your Remote Control for more details.
We Do Not guarantee 100% interoperability with All Universal Remote Controls.
●

Symbols used in this Owner's Manual

The following is the description for the symbols used in this Owner's
Manual. Description refers to:
TV FUNCTIONS
Digital TV Operation
Cable / NTSC (Analog) TV Operation
If neither symbol appears, the operation is applicable to both.
●
DVD FUNCTIONS
: Playback of DVD-video
DVD
: Playback of Audio CD
CD
If neither symbol appears under the function heading, operation is
●
applicable to both.
Quick Start guide
TV base and Screws
Quantity Size
3
M4 x 0.551"(14mm)

Attaching the Base

You must attach the base to the Unit to have it as a table top Unit.
Be sure the front and rear of the base match the proper direction. For
large screen TVs, at least 2 people are required for these steps.
1
2
1
2
3
×
M4 x 0.551" (14mm)
Note(s)
Make sure to use a table which can support the weight of this Unit and is larger than this
●
Unit.
Make sure the table is in a stable location.
●
When attaching the base, ensure that "FRONT" with "arrow" written on the bottom of
●
the base is downward. If it's not downward, the 2 hooks don't fit into the base.
When attaching the base, ensure that All Screws are tightly fastened. If the base is not
●
properly attached, it could cause the Unit to fall, resulting in injuries as well as damage to
the Unit.
To remove the base from this Unit, unscrew the Phillips head screws in step 2. Be careful
●
not to drop the base when you remove it.
9 .
English
Continued on next page.