Configuration
CF 28 – "Adaptive start control" function
Thanks to this function, the required temperature is reached at the
scheduled time.
0
1
Press +/– to activate or deactivate the function.
Confirm with OK.
You will be taken to menu CF29.
CF29 – Setting the temperature/time curve for adaptive
start control
The temperature/time curve depends on the heating system.
Adjustable from 1 to 6 °C in steps of 0.1 °C.
Factory setting: 3 °C.
If the required temperature is reached too quickly, a lower value
should be set.
If the required temperature is reached too slowly, a higher value
should be set.
Change with +/–.
Confirm with OK.
(continued)
Function deactivated
Function activated
13