Programming Unit; Operation; Switching On And Off - Viessmann VITOPLANAR EI2 Operating Instructions For The System User

Programming unit

Operation takes place exclusively via the wired room
thermostat or via the wireless thermostat.

Switching on and off

Switching the appliance on
Danger
If the surface of the appliance or the power
cable is damaged, there is a risk of burns or
electric shock.
The appliance must not be operated if damaged.
Switch off the appliance, unplug the standard
plug (if present) from the socket and notify a
qualified contractor.
Danger
The surface of the appliance can become very
hot and cause burns if prolonged contact is
made.
Do not leave children or vulnerable persons
unattended near the appliance.
Switching the appliance off
Switch off the appliance at the ON/OFF switch.
Maintenance
Maintenance
The heater is maintenance-free.
Cleaning
!
Please note
If the appliance is cleaned while hot, it may be
damaged.
Allow the heater to cool down completely before
cleaning.
Operating instructions for the wired room ther-
mostat or wireless thermostat
1. Only for version with standard plug:
Plug the standard plug into a permanently installed
standard socket.
2. Switch on the appliance at the ON/OFF switch.
The appliance is ready for operation.
Note
Depending on its size, the heater takes some time
to reach the operating temperature. Only then does
the heat radiation take full effect.
!
Please note
Incorrect cleaning agents (e.g. scouring agents)
may damage the surfaces of the appliance.
Only use commercially available glass cleaners
to clean the surfaces.
Clean the surfaces with a commercially available glass
cleaner.

Operation

7