Using The Front Panel - LENCO CS171 USB Owner's Manual

USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the OPEN button, then the front
panel will slide down.
O P EN
2. To remove the front panel, lift it up at a
little angle from horizontal position, then
first pull out the right side and then pull
out the left side.
The left side
Front Panel
3. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
Front Panel
To lnstall the Front Panel
1. To install the front panel, first insert the
left side into proper position then insert
the right side into place.
2. When the two sides fixed int palce,
3. Note that if the front panel fails to lock
The right side
Precautions when handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
Protective Case
3. Do not touch the contacts on the front
4. If any dirt or foreign substances
5. Do not expose the front panel to high
6. Keep away any volatile agents (e.g.
7. Do not attempt to disassemble the
6
The left side
Front Panel
push the front panel into main unit.
in position properly, pressing control
button may not function and the
display may be missing some
segments. Press the OPEN
button and then reinstall the front
panel again.
control buttons when detaching or
reinstalling the front panel.
panel or on the main unit body. It may
result in poor electrical contact.
adhered on the contacts, they can be
removed with a clean and dry cloth.
temperatures or direct sunlight in
anywhere.
benzene, thinner, or insecticides) from
touching the surface of the front panel
front panel.
The right side