LG WM3875HVCA Owner's Manual page 29

T roubleshooting guide
Problem
The display shows:
ERROR
LOAD IS OUT
OF BALANCE.
REARRANGE
WASH LOAD.
The display shows:
ERROR
SEE OWNER'S
MANUAL..
The display shows:
ERROR
SEE OWNER'S
MANUAL..
The display shows:
ERROR
SEE OWNER'S
MANUAL..
The display shows:
ERROR
SEE OWNER'S
MANUAL..
The display shows:
ERROR
THE WASHER
EXPERIENCED A
POWER FAILURE.
RESTART THE
CYCLE.
Possible Causes
• Load is too small.
• Load is out of balance.
• The washer has an imbalance
detection and correction system. If
individual heavy articles are loaded
(bath mat, bath robe, etc.) and the
imbalance is too great, the washer
will make several attempts to restart
the spin cycle. If an imbalance is still
detected, the washer will stop and
the error code will be displayed.
• Control error.
• The water level sensor is not
working correctly.
• Water level is too high due to a
faulty water valve.
• Thermal overload protection circuit
in the motor has been tripped.
• A power failure has occurred.
Solutions
• Add 1 or 2 similar items to help
balance the load.
• Rearrange items to help balance the
load.
• Unplug the washer and call for
service.
• Close the water taps, unplug the
washer, and call for service.
• Close the water taps, unplug the
washer, and call for service.
• Allow the washer to stand for 30
minutes to allow the motor to cool;
then restart the cycle. If the LE error
code still appears, unplug the
washer and call for service.
• Restart the cycle.
29