Chapter 2: Getting Started; Connecting The Enutv-Addt; Device Driver Installation - Encore ENUTV-ADDT User Manual

Chapter 2: Getting Started

2.1 Connecting the ENUTV-ADDT

To install the ENUTV-ADDT into your computer, follow the steps below:

2.2 Device Driver Installation

Place the Setup Disc that came with the ENUTV-ADDT in the CD-ROM drive, then follow
the on-screen installation guide steps below.
1. Connect the TV antenna cable to the
connector.
NOTE: Do not insert the ENUTV-ADDT
TV tuner to the PC USB Port at this time
yet.
1. Insert the Setup Disc CD into the
CD-ROM drive. The setup screen you
see on the left hand side of this page
will automatically appear.
2. Click the "Setup Driver" button.
3. Click "Next" to start the driver
installation.