MSI K9N2 Diamond Series Manual page 35

Important
1. Mainboard photos shown in this section are for demonstration only. The
appearance of your mainboard may vary depending on the model you purchase.
2. If you wish to use 2-way SLI, you must install the two graphics cards in one
mazarine PCIE x16 s lot (PCI_E2) and the first blue PCIE x 16 slot
(PCI_E3). Then, connect two graphics cards together using the 2 SLI bridge
short cables (Fig.2). And remember to enable the SLI technology function
as the following step 2 & step 3.
3. 3-Way SLI technology supports Windows
Fig.2 2-Way SLI Bridge cables connection
Hardware Setup
®
Vista only.
2-21