Table of Contents
Advertisement
How to remove and clean the filter
Turn off and unplug the cleaner. Remove the dust container as per
instructions on page 11.
Remove the filter assembly by unclipping the dust container lid
which is located at the back of the container.
Lift the lid off and twist the
cyclonic filter anti clockwise to
remove from the dust
container. Remove HEPA filter
from the cyclonic filter by
twisting anti clock wise. To
clean, remove excess dust
from the filter using a soft
brush. Wash in warm water
and allow to dry for 24 hours.
Replace the HEPA filter into the cyclonic filter by turning clockwise to
the lock position. Then place the cyclonic filter back into the dust
container and clock wise to the lock position. Refit the dust
container as per the instructions on page 11.
12
Advertisement
Table of Contents
