Baileigh Industrial DC-1450C Operator's Manual
  1. Manuals
  2. Brands
  3. Baileigh Industrial Manuals
  4. Dust Collector
  5. DC-1450C
  6. Operator's manual

Baileigh Industrial DC-1450C Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OPERATOR'S
MANUAL
DUST COLLECTOR
MODEL: DC-1450C
Baileigh Industrial Holdings LLC,
P.O. Box 531
Manitowoc, WI 54221-0531
Phone: 920.684.4990
Fax: 920.684.3944
sales@baileigh.com
REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL
HOLDINGS LLC, IS PROHIBITED. Baileigh Industrial Holdings LLC, does not assume and hereby disclaims any
liability for any damage or loss caused by an omission or error in this Operator's Manual, resulting from accident,
negligence, or other occurrence.
Rev. 07/2019
© 2019 Baileigh Industrial Holdings LLC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DC-1450C and is the answer not in the manual?

Questions and answers

Related Manuals for Baileigh Industrial DC-1450C

Summary of Contents for Baileigh Industrial DC-1450C

  • Page 1 REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL HOLDINGS LLC, IS PROHIBITED. Baileigh Industrial Holdings LLC, does not assume and hereby disclaims any liability for any damage or loss caused by an omission or error in this Operator’s Manual, resulting from accident, negligence, or other occurrence.

  • Page 2: Table Of Contents

    Table of Contents THANK YOU & WARRANTY ..................1 INTRODUCTION ......................3 GENERAL NOTES ......................3 SAFETY INSTRUCTIONS ....................4 SAFETY PRECAUTIONS ....................6 Dear Valued Customer: ....................6 TECHNICAL SUPPORT ....................8 TECHNICAL SPECIFICATIONS ..................9 UNPACKING AND CHECKING CONTENTS ..............10 Cleaning ........................

  • Page 3: Thank You & Warranty

    THANK YOU & WARRANTY Thank you for your purchase of a machine from Baileigh Industrial Holdings LLC. We hope that you find it productive and useful to you for a long time to come. Inspection & Acceptance. Buyer shall inspect all Goods within ten (10) days after receipt thereof. Buyer’s payment shall constitute final acceptance of the Goods and shall act as a waiver of the Buyer’s rights to inspect or...
  • Page 4 We apologize for any discrepancies that may occur. Baileigh Industrial Holdings LLC reserves the right to make any and all changes deemed necessary in the course of business including but not limited to pricing, product specifications, quantities, and product availability.

  • Page 5: Introduction

    INTRODUCTION The quality and reliability of the components assembled on a Baileigh Industrial Holdings LLC machine guarantee near perfect functioning, free from problems, even under the most demanding working conditions. However, if a situation arises, refer to the manual first. If a solution cannot be found, contact the distributor where you purchased our product.

  • Page 6: Safety Instructions

    IMPORTANT PLEASE READ THIS OPERATORS MANUAL CAREFULLY It contains important safety information, instructions, and necessary operating procedures. The continual observance of these procedures will help increase your production and extend the life of the equipment. SAFETY INSTRUCTIONS LEARN TO RECOGNIZE SAFETY INFORMATION This is the safety alert symbol.
  • Page 7 SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. PROTECT EYES Wear safety glasses or suitable eye protection when working on or around machinery. PROTECT AGAINST NOISE Prolonged exposure to loud noise can cause impairment or loss of hearing.

  • Page 8: Safety Precautions

    EMERGENCY STOP BUTTON In the event of incorrect operation or dangerous conditions, the machine can be stopped immediately by pressing the E-STOP button. Twist the emergency stop button clockwise (cw) to reset. Note: Resetting the E-Stop will not start the machine. SAFETY PRECAUTIONS Wood working can be dangerous if safe and proper operating procedures are not followed.
  • Page 9 3. Make sure guards are in place and in proper working order before operating machinery. 4. Remove any adjusting tools. Before operating the machine, make sure any adjusting tools have been removed. 5. Keep work area clean. Cluttered areas invite injuries. 6.

  • Page 10: Technical Support

    21. Maintain machine in top condition. Keep clean for best and safest performance. Follow instructions for lubricating and changing accessories. 22. Reduce the risk of unintentional starting. Make sure switch is in “OFF” position before plugging in power cord. 23. Never leave machine running unattended. TURN POWER OFF. Don’t leave machine until it comes to a complete stop.

  • Page 11: Technical Specifications

    Net Weight 190lbs (86.3KGS) Shipping Weight 218lbs (99KGS) Fan Curve Inlet Diameter of Tube (IN) 6" 5" 4" 3" 2" 1" 0" Static Pressure (mmH2O) 1011 DC-1450C Curve Static Pressure (mmH2O) 1200 1011 1000 6" 5" 4" 3" 2" 1" 0"...

  • Page 12: Unpacking And Checking Contents

    UNPACKING AND CHECKING CONTENTS Your Baileigh machine is shipped complete. Separate all parts from the packing material and check each item carefully. Make certain all items are accounted for before discarding any packing material. WARNING: SUFFOCATION HAZARD! Immediately discard any plastic bags and packing materials to eliminate choking and suffocation hazards to children and animals.

  • Page 13: Transporting And Lifting

    TRANSPORTING AND LIFTING NOTICE: Lifting and carrying operations should be carried out by skilled workers, such as a truck operator, crane operator, etc. If a crane is used to lift the machine, attach the lifting chain carefully, making sure the machine is well balanced. Follow these guidelines when lifting with truck or trolley: •...

  • Page 14: Contents Of Package

    • LEVELING: The machine should be sited on a level, concrete floor. Provisions for securing it should be in position to prevent the machine from moving inadvertently. • POWER SUPPLY PLACEMENT: The power supply should be located close enough to the machine so that the power cord is not in an area where it would cause a tripping hazard.
  • Page 15 Item Description Qty. Part List No. Main Housing Assembly NO.16V1 Cone NO.33 Base NO.25 Drum Lid NO.40 Quick Handle NO.34 Drum NO.48V1 Stand NO.22 Hose NO.39 Canister Filter NO.55V1 Hose Clamp NO.38 Inlet Adaptor NO.18 Handle NO.68V1 Canister Filter Support Bag Clamp NO.53 Drum Wheel NO.47...

  • Page 16: Hardware Package

    Hardware Package Item Description Specification Qty. Part List No. Flange Bolt Screw 5/16” x 3/4” NO.8 Flange Bolt Screw 5/16” x 1/2” NO.21 Phillips Head Screw M5 x 8 NO.35 5/16” NO.95 Open Wrench 10 x 12mm NO.51 Allen Wrench NO.49...

  • Page 17: Assembly And Set Up

    ASSEMBLY AND SET UP WARNING: For your own safety, DO NOT connect the machine to the power source until the machine is completely assembled and you read and understand the entire instruction manual. 1. Secure the Base (NO.25) and Base Wheels (NO.24) with 5/16”...
  • Page 18 3. Tighten the Wheels (NO.47) under the collecting drum (NO.48V1) into the thread nuts. See FIG. 2 Fig. 2 4. Using an assistant, lift up the main housing (NO.16V1) then place on the stand (NO.22). Using the Flange bolt 5/16”x1/2”, screw (NO.21) to tight together. See (FIG.3) CAUTION: The main housing set is heavy, have at least 2 people work together when lifting.
  • Page 19 5. Place the main housing (NO.16V1) and reducing housing (NO.33) and secure with clamp (NO.31) and hex screw (NO.32). See (FIG.4) Fig. 4 6. Assemble Handle (NO. 68v1) inside the Canister Filter (NO. 55v1) and tighten with Set Screw 5/16”x3/4” (NO. 67) and Nut 5/16” (NO. 66). See FIG.
  • Page 20 7. Assemble the Canister filter (NO. 55v1) on the Main Housing (NO.16v1) and tighten with Gasket (No.96) and Flange Bolt Screw5/16”x3/4” (NO. 8) and Nut 5/16” (NO. 95). See FIG. 6 Fig. 6 8. Assemble Inlet Adaptor (NO.18) on Main Housing (NO.16v1) and tighten with Phillips Head Screw 3/18”*3/8”...
  • Page 21 10. Assemble and tighten Hose (NO.39) on Cone (NO.33) and Drum lid (NO.40) with Hose clamp (NO.38). See FIG. 8 Fig. 8 11. Put the PE Bag (NO. 87) into the Drum (NO. 48v1) first, then placed the inner frame inside the PE bag in order (Fig.8) to press the bag down.
  • Page 22 13. All the assembly steps are completed. See (FIG. 10) Fig. 10...

  • Page 23: Electrical

    ELECTRICAL CAUTION: HAVE ELECTRICAL UTILITIES CONNECTED TO MACHINE BY A CERTIFIED ELECTRICIAN! Check if the available power supply is the same as listed on the machine nameplate. WARNING: Make sure the grounding wire (green) is properly connected to avoid electric shock. DO NOT switch the position of the green grounding wire if any electrical plug wires are switched during hookup.

  • Page 24: Power Cord Connection

    • Improper connection of the equipment-grounding conductor can result in risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

  • Page 25: Remote Reset And Clear Function

    REMOTE RESET AND CLEAR FUNCTION Clear 1. Press the reset button (A) on the control box for 3 seconds until the receiver “beep” 3 times. Reset 2. Press the reset button (A) on the control box for 1 second until the receiver “beep” once. 3.

  • Page 26: Exploded Diagram

    EXPLODED DIAGRAM...

  • Page 27: Part List

    Part List Item Description Specification Qty. Motor Bushing MP-20 Bushing 5/16” Spring Washer 5/16” Motor Cord 7x7x25 Motor Packing Flange Bolt Screw 5/16”x3/4” Hanger 5/16” Motor Plate Hex. Bolt 5/16”x1” Impeller 14.5” Set Screw 3/8”x3/4” Impeller Washer Cap Screw M6x20 16v1 Main Housing Philips Head Screw...
  • Page 28 Item Description Specification Qty. Cone Quick Handle Phillips Head Screw M5x8 3/8” Foam Hose Clamp 12-1/2” Hose 12” Drum Lid Long Nut 3/8” Drum Handle Phillips Head Screw 1/4”x1/2” 44v1 Packing 45v1 Acrylic Board Rivet Drum Wheel 5/16”x2” Drum Allen Wrench Remote Control Bar Open Wrench 10x12...
  • Page 29 Item Description Specification Qty. Phillips Head Screw M5x8 Bottom Fixing Support PE Bag Loop Barrel Fixing Stick(long) Phillips Head Screw M3x12 Barrel Fixing Stick(short) Plate Fixing Block 5/16” Gasket Phillips Head Screw 3/16”x1/4”...
  • Page 30 NOTES...
  • Page 31 NOTES...
  • Page 32 BAILEIGH INDUSTRIAL HOLDINGS LLC 1625 D , WI 54220 UFEK RIVE ANITOWOC : 920. 684. 4990 F : 920. 684. 3944 HONE www.baileigh.com BAILEIGH INDUSTRIAL HOLDINGS LTD. U WIFT OINT WIFT ALLEY NDUSTRIAL STATE UGBY , CV21 1QH U IDLANDS...

Table of Contents