Subaru Forester 2013 Owner's Manual page 260

5-8
Audio/Power and sound controls
seconds.
! SVC setting (if equipped)
SVC (Speed Volume Control) is a function
that automatically adjusts the volume
according to the vehicle speed. As the
vehicle speed increases, the audio vo-
lume automatically increases to match the
vehicle speed, in order to create a
pleasant listening environment even as
the driving noise increases. The amount of
this automatic volume change can be set
in the range from OFF to 2. The initial
setting is OFF.
! BEEP setting
A beep sound (operation sound) that
occurs when the audio system is operated
can be set ON/OFF. The initial setting is
ON.
! REG setting (type A audio)
This function prevents the radio from
selecting local stations during AF
searches. It is possible to turn the function
ON/OFF by selecting the "REG" setting.
You can change the setting only when the
Radio Data System (RDS) is on. For
details about RDS, refer to "Radio Data
System (RDS) on FM (type A audio)" F5-
11.
! VOL ADJUST setting (type A
audio)
It is possible to preset the volume that the
set will use when it breaks into playback
with broadcasts of traffic information,
news bulletins and emergency announce-
ments.
If you select the "VOL ADJUST" setting,
the preset break-in volume can be ad-
justed.
NOTE
. If the preset break-in volume is
lower than the current volume when
break-in reception occurs, the volume
does not change to the preset break-in
level. (It remains at the current level.)
. When break-in reception finishes,
the volume returns to the original level.