Table of Contents
Advertisement
LED DISPLAY.
INTERNAL/EXTERNAL SWITCH.
RANGE SWITCHES.
FUNCTION SWITCHES.
ATTENUATOR.
GATE TIME INDICATOR.
FREQUENCY DIAL.(Coarse,Fine)
MHz, KHz , Hz, mHz INDICATOR.
EXTERNAL COUNTER INPUT BNC.
SWEEP RATE CONTROL.
SWEEP WIDTH CONTROL.
VCF INPUT BNC.
SYMMETRY CONTROL.
TTL/CMOS CONTROL.
TTL/CMOS OUTPUT BNC.
DC OFFSET CONTROLS.
MAIN OUTPUT BNC.
AMPLITUDE CONTROL.
Displays Internal or External Frequency.
PUSH IN
: External Frequency
Counter.
PUSH OUT: Internal Frequency
Counter.
Frequency Range Selector.
Select Sine wave, Triangle Wave Or
Square Wave Output.
Selects Output Level By -20 dB.
Gate Time Is Selected Automatically By
Input Signal.
Controls Output Frequency in Selected
Range.
Indicates Unit of Frequency.
Used as an External Frequency
Counter.
On-Off Switch For Internal Sweep
Generator, Adjusts Sweep Rate Of
Internal Sweep Generator.
Pullout And Adjusts Magnitude Of
Sweep.
Voltage Controlled Frequency Input
Permits External Sweep.
Frequency Control Sweep Rate Control
Should Be Off When Applying External
Voltage At This BNC.
Adjust Symmetry Of Output Waveform
1:1 to 10:1 With Push/Pull Switch On.
Selects TTL Or CMOS Mode
Pull-out : CMOS Level Control, Push-
In: TTL Level.
TTL/CMOS Level Output.
Adds Positive or Negative DC
Component to Output Signal.
Impedance 50 Ohm.
Adjusts Output Level from 0 to 20 dB.
Advertisement
Table of Contents
