Ricoh L5160 Cip Training page 7

CIP Training L5160/L5130
Self Help/Service Call
Our Customer Care Centre is a phone call away on
www.ricoh.com.au/support
Alternatively, head to
further access to "How to" documents and videos.
Web Image Monitor
Web Image Monitor is a screen to confirm the machine status and settings on the computer.
When the machine and a computer can be connected to a network, you can access to Web Image Monitor
by entering the IP address of the machine on the address bar of the Web browser.
1. Enter the IP address of the machine in the address bar of the Web browser.
Example: when the IP address of the machine is "192.168.1.10"
• If SSL is specified
https://192.168.1.10/
• If SSL is not specified
http://192.168.1.10/
When you do not know whether SSL is specified on the machine, enter the address starting with https.
When you fail the connection, enter the address starting with http.
When entering the IPv4 address, do not enter "0" for each segment. If "192.168.001.010" is entered, you
cannot access the machine.
The machine status and remaining amount of consumables are displayed.
You can access Web Image Monitor more quickly by registering the machine's URL as a bookmark. Note
that the URL you register must be the URL of the top page, which is the page that appears before login.
If you register the URL of a page that appears after login, Web Image Monitor will not open properly
from the bookmark.
To change the settings, click [Login] at the top right on the screen and enter the User Name and
Password. Defaults: User Name: Admin, no password
1300 887 414
to place a service call, order consumables or have