Table of Contents
Advertisement
Introduction of EasyAir SNS210 MC
5
Design-in Guide - EasyAir SNS210 MC
The Philips EasyAir SNS210 MC is the ideal solution for
per-luminaire control of smart luminaires. It combines
occupancy sensing, daylight harvesting and task tuning in a
single, compact package for easy OEM luminaire assembly.
EasyAir SNS210 MC operates with the established
standard digital interface
connection between sensor and driver, thus eliminating
the need for multiple components and auxiliary devices.
The result is a cost-effective and easy-to-design-in
solution ideal for energy-savings. An intuitive
MasterConnect app makes commissioning and
configuration during and after installation fast and easy.
EasyAir SNS210 MC enables grouping allows scene setting
on a wireless switch (e.g., presentation mode for a
conference room) as well as occupancy sharing (i.e.,
luminaires within a group can be programmed to remain at
prescribed light levels so long as occupancy is detected
anywhere in the group).
EasyAir SNS410 MC has the same form factor as EasyAir
SNS210 MC and uses the same radio tranceiver but is
without the occupancy and daylight sensors.
For more details on specification and ordering codes,
please refer to the SNS210 MC, SNS410 MC datasheets on
the technical downloads page.
www.lighting.philips.co.uk/oem-emea/support/technical-
downloads
D4i open
to make a simple two-wire
August 2021
Advertisement
Table of Contents
