Table of Contents
Advertisement
SNSx10
Light shield
SNS410
13
Design-in Guide - EasyAir SNS210 MC
LED module
LED module
Mounting in a luminaire
EasyAir SNS210 MC, SNS410 MC is a luminaire-mount
sensor that is directly powered by a Xitanium SR LED
driver. It can be mounted to a slot or a cut-out in sheet
metal.
Note: When daylight sensing is enabled, it is advised to
add a light shield in between LED module and EasyAir
SNS210 in case the sensor is placed close to the LED
module and in the same cavity. Without the shield
some light can tunnel through the white housing and
impact daylight sensing.
Mounting EasyAir SNS 4 10 MC inside of a luminaire
Easy Air SNS 4 10 MC can also be placed inside of a
sealed luminaire with plastic housing, because plastic
materials do not block the RF signal and it has no sensor
functionality.
The sensor must not be enclosed by metal parts.
In addition there must be at least 5mm between the
SNS410 MC antenna (rectangular housing extension)
and any other plastic part. The impact of the luminaire
on RF signals can reduce the wireless distances
specified in the SNS410 MC datasheet.
August 2021
Advertisement
Table of Contents
