Table of Contents
Advertisement
FAQ
Can you use a wall dimmer with EasyAir SNS210 MC?
How does EasyAir SNS210 MC compare to Philips ActiLume?
Is EasyAir SNS210 MC a DALI sensor?
Can I use EasyAir SNS210 MC outside a luminaire?
Can I use one sensor with multiple luminaires?
Design-in Guide - EasyAir SNS210 MC
19
SNS210 MC can be used with a wireless wall dimmer,
e.g., Zigbee green power switch. For list of supported
switches, please visit our website
Occupancy sensing and daylight harvesting are similar.
Form factors are also similar, with the face of the sensor
outside the luminaire having the same size. The portion of
EasyAir SNS210 MC within the luminaire is slightly deeper
and longer to accommodate added functionality.
EasyAir SNS210 MC includes granular dimming together
with energy reporting and works with Philips Xitanium SR
LED drivers to eliminate the cost and complexity of a
separate power pack.
EasyAir SNS210 MC works with Philips Xitanium SR
LED drivers, which have inbuilt power supply. It
cannot be used with DALI drivers and therefore,
EasyAir SNS210 MC is not a DALI sensor.
An accessory option called CMP/w is available to
enable ceiling mounting. Wiring to the driver must be
kept less than 2m.
Yes, and the ceiling mount option is likely utilized in this
use case (called 1:N operation as opposed to 1:1). It usually
means turning off the SR power supplies in all but one of
the SR drivers. See EasyAir SNS210 MC with multiple SR
drivers 1:N application section.
August 2021
Advertisement
Table of Contents
