Audio Inputs; Using The Stereo Rca Inputs; Using The Optical Input - iLive ITB284B User Manual

Audio Inputs

using the Stereo Rca Inputs...

When connecting two products using an RCA Cable, match the colored ports on the unit (red/white) with the same
colored connection on the cables.
1. Connect the RCA Cables (included) to the RCA Stereo Inputs located on the back of the unit, and to the audio
outputs on the television.
2. Press the Power button to power on the unit.
3. Press the Source button repeatedly to enter auX Mode, indicated by a white light.
4. Audio played through the television will now be heard through the speakers.
and the Subwoofer output
Please Note: Connecting an external subwoofer will require one additional RCA cable than is included with the unit,
and must be supplied by the user.
1. Use another RCA cable (not included) to connect an external subwoofer to the Subwoofer output.
2. When audio is played through any source, the speaker will automatically use the connected subwoofer.

using the optical Input

You will need: An audio source with an Optical Audio Output and a Digital Optical Audio Cable (not included)
1. Connect the Digital Optical Audio Cable to the optical output on the audio source and to the Optical Input
on the speaker bar.
2. Press the Power button to power the unit on.
3. Press the Source button repeatedly to switch to SPDIF Mode, indicated by a amber light.
4. Using the native controls on your connected device, make sure the audio settings are set to PcM or optical
audio and are turned On.
5. Audio from the connected audio source will now be played through the speakers.
Important tips for optical audio:
Use the correct toslink cable and make sure that it is firmly seated in both source and sound bar sockets.
Optical output is activated on the source (they should see a red light emitting from the toslink socket).
It may be labeled SPDIF in the setting menu of the source.
The optical output is set to output PCM and not Dolby Digital.
8
ITB284-1100-01-IB.indd 8 6/18/2014 3:59:11 PM