Encore ENMGS-24+4 User Manual page 7

LED for each port:
The switch provides one "1000M" LED and one "10/100M" LED for each port.
1000M LED: Shows the current transmitting/receiving speed of the
port.
10/100M LED: Shows the link status and the activities on the port.
LED Status
Green
Blinking Green
1000M
Off
Steady Green
10/100M
Blinking Green
Off
Attention：The Mini GBIC slot shares the same LED indicator with the
last 4 RJ-45 (copper) port.
Port Operation
The auto-negotiation feature allows those ports running at one of the
following operation modes:
Media
10/100/1000Mbps(copper)
1000Mbps(Fiber)
(mini GBIC required)
Note: For the last port, when both the fiber and cooper interfaces are
connected, the system adapts the fiber interface and disables the relevant
cooper port automatically.
Operation
The port is connected at 1000 Mbps
A valid link is established, and there is data
transmitting/receiving.
No valid link on this port or the Port is connected at
10/100 Mbps
A valid link is established, and there is no data
transmitting/receiving.
A valid link is established, and there is data
transmitting/receiving.
No valid link on this port or the port is connected at
1000 Mbps
Speed
10Mbps
100Mbps
1000Mbps
1000Mbps
6
Duplex Mode
Full Duplex
Half Duplex
Full Duplex
Half Duplex
Full Duplex
Full Duplex