DuroStar DS5000DX User Manual page 33

5.
Close choke
The choke lever is located above the air filter to the left of
the recoil start. Slide the lever to the left to cut the air supply
and allow more gas into the engine to start.
6.
Start the generator
The engine switch is located on the left side of the front
power panel. Flip the switch up to the "START" position.
When the engine starts, allow the engine switch to return
to the "RUN" position.
7.
Open choke
Push the choke to the OPEN position as the engine warms up.
8.
Turn breaker on and connect
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow the power to flow to the
receptacles. Connect your devices to the receptacles on the
front panel. Start with the largest loads first.
33