Advertisement
Table of Contents
ESR9850 Wireless 11N Gigabit AP Router
Connect the supplied power-adapter to the power inlet port and connect it to a wall
outlet. Then, the router automatically enters the self-test phase. During self-test phase,
Power LED will blink briefly, and then will be lit continuously to indicate that this
product is in normal operation.
CHECK
•
A standard CD-ROM drive
•
Internet connection should be setup & ready to use (ADSL or cable modem).
•
Modem must provide RJ45 port to connect with ESR9850.
•
Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter
•
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect ESR9850 WAN port & your modem WAN port with RJ45 cable.
STEP 2
Power up ESR9850. POWER led on front panel lights up & remains stable.
STEP 3
Connect ESR9850 LAN port & PC/Notebook RJ45 port with network cable.
STEP 4
Insert Wizard CD into your CD-ROM drive. If Wizard does not start automatically,
please browse it with Windows Explorer.
Click on "Wizard.exe" to activate SMART WIZARD.
Quick Start Guide
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EnGenius ESR-9850
Summary of Contents for EnGenius ESR-9850
-
Page 1: Quick Start Guide
Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet. Then, the router automatically enters the self-test phase. During self-test phase, Power LED will blink briefly, and then will be lit continuously to indicate that this product is in normal operation. - Page 2 Please click on Setup Wizard and follow the instruction given to complete the device initiation configuration. Thank you for supporting EnGenius. Quick Start Guide – ESR9850 Wireless Broadband Router.
Need help?
Do you have a question about the ESR-9850 and is the answer not in the manual?
Questions and answers