Starting The Generator - Remote Start - DuroStar DS7000Q User Manual

STARTING THE GENERATOR (CONTINUED)

Starting the Generator - Remote Start

24
1.
Turn the breaker ON
The breaker is located on the right side of the front power
panel. Flip the breaker down to prevent accidental load
when starting the generator.
2.
Run/Stop Switch
The Run/Stop Switch is located inside the mainentance
door above the oil fill. Flip the switch to the right to allow
the unit to run.
3.
Turn engine switch to START
The key switch is located on the left side of the front power
panel. Insert the key and turn to the start position to OFF.
This will allow you to use the remote to start the generator.