Advertisement
Quick Links
Advertisement
Related Manuals for BROSA Hirudo Floor Lamp
Summary of Contents for BROSA Hirudo Floor Lamp
- Page 1 ASSEMBLY GUIDE Hirudo Floor Lamp...
- Page 2 Components Before you get started, check you have all of the pieces below. If anything’s missing, please visit www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it out right away. Top Socket x 1 Base x 1 Balance Handle Shade x 1 Pole x 4...
- Page 3 Safety MAX 40W 220-240v ~ 50Hz 1. For indoor use only 2. Follow instructions carefully. Any deviations may be hazardous, or void your warranty. 3. Damaged power cords must be replaced by a professional. 4. Never use a bulb of a greater wattage than recommended. 5.
- Page 4 Align the bottom pole with the base Step 1 rmly screw them together. Continue with the second pole then the third pole (3). Align the balance weight with the end of the horizontal pole and rmly screw them together. Align the middle hole of the horizontal pole to the third pole...
- Page 5 Place the shade at the end of the pole. Carefully Step 2 adjust the shade and tighten it in place with the top socket (8). Gently screw the correct bulb (not includ- into the bulb socket. Adjust the angle of the pole using the handle screw.
- Page 6 Check if all parts are secure. Step 3 Enjoy! We hope your new lamp lights up your life.
Need help?
Do you have a question about the Hirudo Floor Lamp and is the answer not in the manual?
Questions and answers