Dc Usage - DuroStar DS4400E User Manual

USING THE GENERATOR (CONTINUED)

DC Usage

CAUTION: The DC receptacle is for recharging 12 Volt automotive-type batteries
only. Do not connect any other device to this receptacle.
CAUTION: Never try to jump start a car with your generator.
34
1.
Connect the battery
Connect one charging wire to the positive terminal on the
battery and the other charging wire to the negative terminal
on the battery.
2.
Connect positive receptacle
Connect the free end of the positive wire to the positive
receptacle (outlet) on the generator.
3.
Start Generator
The key switch is located on the left side of the front power
panel. Insert the key and turn to the start position to start
the generator. Allow the key to return to the run position
once started.