DuroStar DS4400E User Manual page 17

GENERATOR SETUP
Connect the Battery
1.
Disconnected on arrival
The generator battery is disconnected on arrival to
prevent discharge or accidental starting in storage and
transportation.
2.
Locate the negative cable
a. Locate the negative battery cable above and behind
the battery. One side is connected to ground and
the other end needs to be connected to the battery.
b. Route the free end to the negative battery terminal.
3.
Connect the negative cable
a. Push the black rubber boot up the wire to expose
the connector.
b. Securely connect the free end of the battery cable
to the negative battery terminal using the screw
and nut from the battery with the screwdriver and
wrench from the toolkit.
4.
Cover the terminal
a. Cover the connected terminal with the black rubber
boot.
17