Chevrolet Corvette C8 2021 Manual page 50

PAGE-44
EXTERIOR
BRIGHT METAL
MOLDING
(Protection)
**P- 285 (Owners)
CONVERTIBLE TOP
(Care)
**P- 285 (Owners)
LAMPS-LENSES-
EMBLEMS-DECALS
(Cleaning)
**P- 285 (Owners)
CARBON FIBER
(Care)
**P- 285 (Owners)
AIR INTAKES-GRILLES
(Care)
**P- 286 (Owners)
WEATHERSTRIPS
(Care)
**P- 286 (Owners)
NORMAL OPS
CAR CARE
The bright metal moldings on the vehicle are aluminum, chrome, and stainless
steel. To prevent damage always follow these cleaning instructions: .
Be sure the molding is cool to the touch before applying any cleaning

solution. .
Use only approved cleaning solutions for aluminum, chrome, and stainless

steel. Some cleaners are highly acidic or contain alkaline substances and can
damage the moldings. .
Always dilute a concentrated cleaner according to the manufacturer's

instructions. .
Do not use cleaners that are not intended for automotive use. .

 Use a nonabrasive wax on the vehicle after washing to protect and extend the
molding finish.
CAUTION
Failure to clean and protect the bright metal moldings can result in a hazy white
finish or pitting. This damage would not be covered by the vehicle warranty.
Only lower the top when it is completely dry and avoid leaving the top lowered for
extended periods of time to prevent excessive interior weathering.
Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean
exterior lamps, lenses, emblems, decals, and stripes. Follow instructions under
"Washing the Vehicle" previously in this section.
Lamp covers are made of plastic, and some have a UV protective coating. Do not
clean or wipe them while they are dry.
Do not use any of the following on lamp covers: .
Abrasive or caustic agents .

 Washer fluids and other cleaning agents in higher concentrations than
suggested by the manufacturer .
 Solvents, alcohols, fuels, or other harsh cleaners .
Ice scrapers or other hard items .

 Aftermarket appearance caps or covers while the lamps are illuminated, due
to excessive heat generated
CAUTION
Failure to clean lamps properly can cause damage to the lamp cover that would not
be covered by the vehicle warranty.
CAUTION
Using wax on low gloss black finish stripes can increase the gloss level and create a
non-uniform finish. Clean low gloss stripes with soap and water only.
Carbon fiber composite parts can be washed and waxed like any other parts. Use a
clear or black pigmented wax. See Composite Materials P-191.
Keep the rear and hood mesh grilles clear of debris. The metal mesh grilles may be
hot to the touch after vehicle operation.
Do not apply wax to the mesh grilles

Apply weather strip lubricant on weather strips to make them last longer, seal
better, and not stick or squeak. Lubricate weather strips at least once a year. Hot,
dry climates require more frequent application. Black marks from rubber material
on painted surfaces can be removed by rubbing with a clean cloth. See
Recommended Fluids and Lubricants P-301.
CAR CARE- PAGE 2 of 7
12-8-20