Appendix 1.2 Cleaning Procedure For Fc/Apc Bulkhead Ports; Appendix 1.2.1 Swab Method; Appendix 1.2.2 Compressed Air Method; Figure 21 Cleaning The Optical Port - Foxcom SATLIGHT 7225H Installation And User Manual

Appendix 1.2 Cleaning Procedure for FC/APC Bulkhead Ports
Clean the transmitter and receiver optical ports only when
Caution
there is evidence of contamination or reduced performance.
Appendix 1.2.1 Swab Method
Using a clean fiber optic cleaning swab, gently wipe out the optical
port. Discard the swab after use.
Figure 21 Cleaning the Optical Port
Figure 22 Cleaning the Optical Port [2]
Appendix 1.2.2 Compressed Air Method
Using the extension tube of the compressed air, blow into the port to
remove any dust or debris. Do not allow the tube to touch the bottom
of the port. Do not use commercial compressed air due to potential oil
contamination.
To prevent contamination, the optical ports should be
Note
connected or covered with a dust cap at all times.
Use dry air or nitrogen only.
7225H Interfacility Link Installation and User's Guide
Foxcom proprietary information
page 33