Table of Contents
Advertisement
Pos : 16 /T echnisc he Dokumentation/Betriebsanl eitungen/Empfänger/M ontag e_neu @ 10\mod_1394788090502_48.doc x @ 120333 @ 1 @ 1
Installation
The receiver should be mounted vertically with the cable connection downwards .
Ensure that there are no metal parts within a radius of 1 m (3 feet) above the receiver .
When the receiver has to be mounted in a control cabinet, a car antenna must be installed.
Receivers with external antenna must be installed in such a way that the antenna stands freely and
does not touch walls or metal parts. Otherwise a car antenna must be used, which can be supplied if
needed.
Receivers with plastic housing should be protected against direct sunlight (UV radiation) by
appropriate measures.
Pos : 17 /T echnisc he Dokumentation/Betriebsanl eitungen/Empfänger/VS_M ontage mit Wandhalterung @ 10\mod_1394801442922_48.doc x @ 120361 @ 2 @ 1
Installation with Snap-In Wall Bracket
The receiver is installed by means of the snap-in wall bracket included in the delivery. Install the wall
bracket with the provided drilling holes. Use only screws (max. M6) that are suitable to the installation
location.
Place the receiver with the eyelets on the wall bracket pins and press it on the wall bracket until it clicks
into place. Press the engagement pins outwards with a large screwdriv er, to remove the receiver from the
wall bracket. This releases the receiver off the wall bracket from where it can be removed to the front.
Pos : 18 /T echnisc he Dokumentation/Betriebsanl eitungen/Empfänger/VS_M ontage mit Befestigungslasc hen @ 10 \mod_1394805357262_48.doc x @ 120389 @ 2 @ 1
Installation with Mounting Loops
The receiver is installed via the integrated mounting loops on the receiver sides. Use the shock mounts
provided for installation to dampen any vibrations that may occur.
Pos : 19 /T echnisc he Dokumentation/Betriebsanl eitungen/Allgemei n/----- Sei tenumbr uch ------ @ 1\mod_1219672326234_0.doc x @ 29509 @ @ 1
6 / 13
Hide quick links:
Advertisement
Table of Contents
