Troubleshooting - HBC-Radiomatic FSE 511 Operating Instructions Manual

Pos : 42 /T echnisc he Dokumentation/Betriebsanl eitungen/Empfänger/Problembehandl ung - Empfänger _USA @ 4\mod_1265621218004_48.doc x @ 57180 @ 1 @ 1

Troubleshooting

Note:
Please check the functions using the cabin or cable controls first !
Problem
Transmitter does not react
when switched on.
Low-power indication after
minimal operating time.
Some commands are not
carried out.
If none of the measures mentioned resolve the problem, then please contact your service techn ician,
dealer or HBC-radiomatic, Inc.
Pos : 43 /T echnisc he Dokumentation/Betriebsanl eitungen/Allgemei n/----- Sei tenumbr uch ------ @ 1\mod_1219672326234_0.doc x @ 29509 @ @ 1
12 / 13
Possible Cause
No power.
Battery contacts are
contaminated or damaged.
Battery not charged.
Battery defective.
Receiver defective.
Interruption in the connecting
cable to the crane or
machine.
Measures
Check battery contacts for
damage or contamination.
Insert a fully charged battery
into the battery compartment.
Recharge battery.
Check battery contacts for
damage or contamination.
Recharge battery.
Ensure that recharging
process runs correctly.
Check transmitter functions
using a fully charged or
replacement battery.
Check if all connecting
cables and cable junctions
are tight.