Advertisement
REMEMBER to Shut the Power Off at the Circuit Breaker or Fuse Box.
WARNING: HOOK UP IN "SERIES ONLY" DO NOT CONNECT THE HOT AND NEUTRAL WIRES OF ELECTRIC
CIRCUIT TO THE TRANSMITTER WALL SWITCH - DAMAGE TO THE SWITCH AND POSSIBLE FIRE COULD OCCUR.
Step 1. Remove the existing wall plate and switch from the wall junction box.
Step 2.
Make the electrical connections as shown in (Fig. 10&11). If your outlet box has a ground wire (green or bare copper)
connect the wall transmitter's ground wire to it; otherwise connect the wall transmitter's ground wire directly to one of the screws
from the outlet box.
Step 3. (Fig.
12
) Carefully tuck the wire connections inside the junction box. Secure the wall transmitter with the two screws
provided. Attach the wall plate over the wall transmitter and secure with the two screws provided.
Figure 12
7. Installing the Wall Transmitter
Advertisement
