Advertisement
Installation of Safety
Support
n additional safety support is provided to
A
prevent the fan from falling. Secure the safety
cable to the ceiling joist with screw and washer,
as illustrated in Figure 13.
Outlet box
Hanger
bracket
Figure 13
Finishing the
Installation
Step 1. Tuck connections neatly into ceiling
outlet box.
Step 2. Slide the canopy up to ceiling and
over the 2 screws on the hanger bracket.
Rotate canopy clockwise. Next, while
holding the canopy with one hand, slide the
canopy cover over the screws and rotate
clockwise until tight. Note: adjust the
canopy screws as necessary until the canopy
and canopy cover are snug. (Fig. 13)
Safety Cable
Make sure the notch on the hanging
bracket properly sits in the groove in the
hanger ball before attaching the canopy to
the bracket by turning the housing until it
WARNING
drops into place.
Outlet box
Hanger
bracket
Hanger
ball
Figure 14
Canopy
Canopy
cover
8.
Advertisement
