Controlling Your Tv With The Supplied; Remote Control - LG DR199 Owner's Manual

Controlling Your TV with the
Supplied Multi-brand Remote
Control
You can control the sound level, input source, and
power switch of your TV with the supplied Multi-brand

Remote Control.

You can control your TV using the buttons below.
By pressing You can
POWER Turn the TV on or off.
INPUT Switch the TV's input source
between the TV and other input
sources.
CH +/– Scans up or down through
memorized channels.
VOL +/– Adjust the volume of the TV.
MUTE Temporarily turns TV sound OFF,
press again to restore.
48
TV Control
Buttons
Controlling other TVs with the Multi-
brand Remote Control
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (see the table below).
2. Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Manufacturer Code Number
LG / GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4
Notes:
Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.
If you enter a new code number, the code number
previously entered will be erased.
When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.