Clock Set; Tv Aspect; Progressive Scan; Power Save Mode - LG DR199 Owner's Manual

Clock Set

Auto
In the Auto option, the Recorder looks for a
channel carrying XDS (Extended Data Services)
information. XDS updates the clock using the
Coordinated Universal Time.
1. Select the [Clock Set] > [Auto] option.
2. Press ENTER.
3. Use v / V to choose your Time Zone
manually. When Timezone is set to Auto,
the Recorder will use XDS information to
determine the proper setting.
4. Use B to choose the [Daylight Savings] option.
Use v / V to choose Auto, ON, or OFF.
When it is set to Auto, the Recorder will use
XDS information to determine the proper
setting.
5. Press ENTER to confirm your setting.
Note :
The Auto Clock Feature enables the Recorder to
set up the clock when the Recorder is turned off.
Manual
If your local TV station does not send date and
time information, or sends incorrect information,
you can set the clock manually.
1. Select the [Clock Set] > [Manual] option.
2. Press ENTER.
3. Enter the necessary information for year, date
and time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
4. Press ENTER to confirm your setting.

TV Aspect

Selects the aspect ratio of the connected TV (4:3
standard or wide).
[4:3 Letter Box] Select this when connecting to a 4:3
screen TV. Displays a wide picture with bands on
the upper and lower portions of the screen.
[4:3 Pan Scan] Select this when connecting to a 4:3
screen TV. Automatically displays a wide picture on
the entire screen and cuts off the portions that do
not fit.
[16:9] Select this when connecting to a wide-screen
TV or TV with a wide mode function.
Progressive Scan (DR197 only)
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to [OFF].
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks for connection to a TV
or monitor that is compatible with a progressive scan
signal, set Progressive Scan to [ON].
Caution
Once the setting for Progressive Scan output is
entered, an image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
recorder. First, remove the disc in the recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.

Power Save Mode

You can set up the unit into an economic power save
mode. Nothing is displayed in the display window
when the unit is turned off.
[OFF] Power Save Mode is not active.
[ON] Power Save Mode is active.
Note:
The Power Save Mode is not available in the standby
mode for the timer recording.

Factory Set

If you need to, you can reset the Recorder to all its
factory settings. Select ''Set'' icon then press ENTER
and auto setup menu will appear, see page 17.
Note:
Some options can not be reset. (Rating, Password,
and Area Code)
19