PowerBass PS-WB101 Application & Enclosure Manual
  1. Manuals
  2. Brands
  3. PowerBass Manuals
  4. Subwoofer
  5. PS-WB101
  6. Application & enclosure manual

PowerBass PS-WB101 Application & Enclosure Manual

Single subwoofer bass reflex system
Hide thumbs

Advertisement

Table of Contents

PS-WB101
PS-WB121
SINGLE SUBWOOFER BASS REFLEX SYSTEM
Application & Enclosure Guide
Please read through this manual to familiarize yourself with your new subwoofer. Should your PowerBass
Autosound Subwoofer System ever require service, you will need to have the original dated receipt.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS-WB101 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PowerBass PS-WB101

Summary of Contents for PowerBass PS-WB101

  • Page 1 PS-WB121 SINGLE SUBWOOFER BASS REFLEX SYSTEM Application & Enclosure Guide Please read through this manual to familiarize yourself with your new subwoofer. Should your PowerBass Autosound Subwoofer System ever require service, you will need to have the original dated receipt.
  • Page 2 At PowerBass USA, Inc. we are confident you will have many years of outstanding enjoyment from this great SPEAKER investment. For maximum performance we recommend that you have your new PowerBass Auto- sound product installed by an Authorized PowerBass Autosound Dealer.
  • Page 3 POWERBASS AUTOSOUND LOADED ENCLOSURE FEATURES Heavy-duty Box Design: The enclosure is constructed from non-resonant 5/8” panels that have been glued, braced and sealed. Each box is finished in a stylish two tone RFG aviation grade vinyl covering. Bass Reflex Single Port System: Utilizing a Bass Reflex design offers increased efficiency at low frequencies.
  • Page 4 Installation of PowerBass Autosound Speakers requires experience with a variety of mechanical and electrical procedures. This manual only provides general installation and operating instructions. If you have any reservations about your installation skills or lack the proper tools, please contact your local PowerBass Autosound dealer for assistance.
  • Page 5 • Use speaker wire large enough to carry the full power of your amplifier. 14-gauge or larger should be adequate. (Speaker wire not included) Your PowerBass Bass Reflex subwoofer system needs to be installed some place where it can operate efficiently and not endanger the occupants of the vehicle.

  • Page 6: Wiring And Connections

    WIRING AND CONNECTIONS The PowerBass Bass Reflex subwoofer system consists of a single 4-ohm voice coil woofer. Check to see that your amplifier is optimized to drive this load. A single spring loaded push terminal cup provides a quick and easy connection from your bass amplifier to your Bass Reflex system Fig.1...

  • Page 7: Sound Check

    SOUND CHECK Your PowerBass Bass Reflex Subwoofer system will operate at optimum performance after a break-in period. Allow the system to play 20 to 30 hours at moderate levels. To sufficiently drive either the Single Woofer 10 or 12-inch system, we recommend using an amplifier with at least 150 watts RMS mono output.

  • Page 8: Warranty Notes

    PowerBass Importer/Distributor in your country. This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other than its intentions is strictly prohibited without the express consent of PowerBass USA, Inc. Copyright 2016 PowerBass USA, Inc.
  • Page 9 Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for PowerBass any other liability in connection with the sale of this product.
  • Page 10 PowerBass Autosound – A division of PowerBass USA, Inc. 2133 South Green Privado – Ontario, CA 91761 Tel. (909) 923-3868 – Fax (909) 923-8048 www.powerbassusa.com...

This manual is also suitable for:

Ps-wb121

Table of Contents