Channel List - Sharp 32BC2E User Manual

– Time Zone - Change your current time zone.
– Daylight Saving - option to manually turn daylight saving on/off .
On Time - Allows you to set a specifi c time for your TV to turn on, the
channel it will then display, the source it will be on and also the volume.
This function can then be toggled to repeat every day or a certain day.
Off Time - Allows you to set a specifi c time for your TV to turn off .
Sleep Timer - Lets you set the sleep timer so the television automatically
switches off after a set amount of time. Off -> 10min -> 20min ->
30min -> 60min -> 90min -> 120min -> 180min -> 240min.
Auto standby - Adjustment for the auto standby in
hourly increments: Off -> 3h -> 4h -> 5h.
OSD Timer - Lets you adjust the amount of time the On
Screen Menu stays on the screen before disappearing.
SYSTEM
Language - Set your preferred languages.
– Menu Language - Allows you to change the language of the menu.
– Primary Audio Language - Preferred audio
language on selected DVB channels.
– Secondary Audio Language - Secondary audio language
in case audio in primary language is not available.
– Primary Subtitle Language - Preferred subtitles
language on selected DVB channels.
– Secondary Subtitle Language - Secondary subtitles language
in case subtitles in primary language are not available.
Lock
– Lock - Allows you to lock or unlock the menu. You will be asked to
enter a 4 digit password. Use the ◄ button to quit the password
input. Use the ► button to clear. Default password is 0000.
– Set Password - Change the default password.
– Channel lock - Lock specifi c TV channels.
– Parental Guidance - Lock TV channels based on age restriction.
HDMI Settings - Set up the HDMI functionality.
– CEC Control* - Enable/disable HDMI CEC function. This allows you
to operate devices connected via HDMI with TV remote control.
– Device Auto Power Off * - If set on, all devices connected to
TV via HDMI will go into standby when television turns off .
– TV Auto Power On* - Enable television turning on from
standby when any connected HDMI device powers up.
– HDMI ARC - Sends audio signal via HDMI to connected audio device (AV
receiver, soudbar etc.). This function is available only on HDMI 3 input.
– Detect - Shows list of devices connected via HDMI.
* - HDMI CEC must be supported by connected device.
Source Rename - this allows user to manually rename
items in your list of input sources. For example, you can
rename inputs to the names of connected devices.
Expert Settings
– PVR&Time-Shift Settings* - Recording options
– Disk - Select one of connected disks.
– Select Partition - Select disk partition.
– Timeshift - Choose amount of memory allocated
to time shifting – 512MB, 1G, 2G or 4G.
– Format - Format the connected device.
WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED.
– Speed Check - Speed test of connected USB device.
* - only for devices with built in PVR function
– Hearing Impaired - If signal provides support for the hearing
impaired, the subtitles can be played by pressing the "Subtitle". If
you set Hearing Impaired ON and switch to a channel with supports
for hearing impaired subtitles will be activated automatically.
– Store Mode* - switch ON/OFF shop demonstration mode
* - available only if store mode was selected during fi rst time installation
ABOUT TV
System Information - Shows the set name and software version.
System Upgrade - Allows you to update your TV.
– Software Update (USB) - From time to time, we may release
new fi rmware to improve the operation of the television
(available to download). This menu lets you install the new
software/fi rmware onto the television. Further details of
how to do this will be issued with the fi rmware. Contact the
helpline or refer to the 'www.sharpconsumer.eu' website.
WARNING: Do not turn off the TV's power until the upgrade is complete!
– OAD - Switch on/off OAD (over air download)
software updates (only in Digital TV).
– OAD Scan - Scan for an Over Air Download (only in Digital TV).
Reset TV - Reset the television.
Netfl ix ESN Key - Shows the Netfl ix ESN Key code.
Netfl ix Version - Netfl ix software version.
Netfl ix Deactivate - Deactivate Netfl ix on this set.
Netfl ix Terminate - Delete Netfl ix login information on this set.
MEDIA
USB
Multimedia mode off ers the playback of various content saved on a USB
Memory Stick. The content will be divided into various fi le types: Photo,
Music and Movie.
The 'ALL' option will show and allow you to play all types of supported
content.
You can navigate through the menu using the scroll ▲/▼/◄/►
1.
buttons. To confi rm the item you wish to play/view press [OK] button.
2. While viewing content you can control the playback modes using the
remote control buttons or by bringing up the playback navigation
menu and selecting on-screen buttons ▲/▼/◄/► and [OK]
NOTE: USB extension cables are not recommended as
they can cause a reduction in picture/audio quality and
stoppages during play back of USB content.
Miracast*
Allows you to view content from your smart phone or tablet on the TV
screen. Miracast is formed using Wi-Fi Direct, so access to a Wi-Fi network is
not needed. You can share content from your smartphone or tablet based
on Android 4.4 and newer system.
Media Server
Automatically searches for digital media servers (DMS) connected to your
home network and enables the playback and rendering of content from
media servers
* - This function is only available on selected smartphones and note-
books.
SOURCES
From this menu, you can switch your TV input signal to diff erent source/
connected device.

CHANNEL LIST

To activate the channel list, press the [OK] button when watching TV. This
allows you to quickly select a channel to watch – select the desired channel
by using the up and down arrows or the CH +/- buttons on the remote
control. Press [OK] to watch.
While in this menu the following two options can be selected:
Filter Channels; press [INFO]: This allows you to fi lter
the channels shown in the channel list by type.
19