Windscreen - Sym Joymax Z+ Owner's Manual

○
Turn Signal Switch
C
When the turn signal switch is turned to the left
and off. To stop blinking, push the switch in.
○
Horn Button
D
When the horn button is pushed when the ignition switch is turned on; the horn sounds.
○ E
Hazard Warning Switch
Push the switch to
signal indicators will blink.
NOTE :
 Do not use the hazard lights for a long period of time, or the battery may become totally discharged.
 If you turn the ignition switch off without deactivating the hazard lights, the hazard lights cannot be
deactivated unless you turn the ignition switch on.
○
TCS Button
F
(LW30W2-EU only)
This scooter is equipped with traction control system (TCS). The traction control system can be turned
off/on by pushing this button for approximately 3 seconds.

Windscreen

This scooter is equipped with a 2-position adjustable windscreen. Adjust the positions to fit your figure.
High position: ○
A
Low position: ○
B
 Remove the 2 screws ○
 Remove the 4 flange bolts; select a position that you prefer and mount the windscreen.
 Install the 2 garnishes.
(Model with this equipment)
position with the ignition switch in "On" position. All the turn signal lights and turn
○
A
○
B
○
D
to remove the 2 windscreen garnishes ○
C
or right , the corresponding turn signals blink on
○
C
.
D
14
○
E
○
A
○
B