General Description - Temperature Guard VM605 Manual And Installation Instructions

General Description

The Refrigerator/Freezer or Property Guard is a complete multiple device monitor and alarm
system with integrated auto-dialer, Ethernet port and on board data logging. Through the
rest of the manual the Refrigerator/Freezer or Property Guard will be referred to as Guard.
The Guard monitors up to eight (8) temperature sensors, an unlimited number of magnetic
door sensors and power.
The Guard has programmable high and low temperature limits and an alarm time delay for
each sensor. An identification message can be recorded for each sensor, indicating where
the sensor is located to allow a quick response to a problem. The Guard has numerous op-
tions that allow it to be configured for any application.
The Guard can monitor doors with its dedicated door sensor inputs. A time delay can be
programmed, enabling a freezer door to be left open for a maximum amount of time before
the buzzer is activated and the Guard begins its alarm procedures.
The Guard has an internal buzzer and an alarm relay that can be programmed to turn on or
off when the temperature of any location is out of limits for greater than the alarm time delay
or if a freezer door has been left open.
The Data Capture 5 (Rev 5.4.7 or higher required) software stores data internally and may
be downloaded any time from www.temperatureguard.com With the Data Capture soft-
ware you can also regularly collect data across your LAN and store readings on a PC. Also,
alert emails can be sent out to alert staff to temperature issues. A built-in web server allows
you to use a simple web browser to check the temperatures by entering the IP address of
the device into a web browser.
3