Weider Crossbow ADVANTAGE WESY59831 User Manual page 20

PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on the reverse side of this page. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M8 Split Washer (52)
M10 Split Washer (103)
M8 Washer (59)
M10 Washer (75)
38mm Round
19mm Spacer (17) 22mm Spacer (106)
Inner Cap (38)
19mm Round Inner Cap (78)
25mm Square Inner Cap (54)
45mm Round
Inner Cap (56)
50mm Round
Inner Cap (57)
50mm Square
Inner Cap (98)
57mm Round Outer Cap (27)
38mm x 64mm Inner Cap (41)