1. Manuals
  2. Brands
  3. Elmo Manuals
  4. Security Camera
  5. HC7501
  6. Instruction manual

Elmo HC7501 Instruction Manual

Ccd color video camera
Hide thumbs Also See for HC7501:
Table of Contents

Advertisement

Quick Links

Download this manual
I N S T R U C T I O N M A N U A L
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION
· Do not use any power supply other than
specified.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
* The CAUTION label is attached on the
bottom of camera.
H C 7 5 0 1
INFORMATION
This equipment has been tested and found
to comply with the limits for Class A digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, use, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his
own expense.
USER-INSTALLER CAUTION:
authority to operate this FCC verified
equipment could be voided if you make
changes or modifications not expressly
approved by the party responsible for
compliance to Part of the FCC Rules.
Your

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HC7501 and is the answer not in the manual?

Questions and answers

Related Manuals for Elmo HC7501

Summary of Contents for Elmo HC7501

  • Page 1 I N S T R U C T I O N M A N U A L CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, install in accordance with the manufacturer's instructions.

  • Page 3: Part Names And Functions

    PART NAMES AND FUNCTIONS 60 (2.4) Lens mount Mount a CS-mount lens. For C-mount lens or C-mount coupler, use supplied C-mount ring. Camera mount For mounting a camera on bracket, tripod, etc. (1/4"-20UNC thread) Back focus dial Refer to "HOW TO USE" on page 4 for details. IRIS terminal Connect when an automatic iris lens is used.

  • Page 4: How To Connect

    12VDC input, external sync input and Y/C output. (You may procure separately the cable assemblies by using supplied connectors or purchase them from ELMO as an option) Caution: Installation should be made by a qualified service personnel and should conform to all local codes.

  • Page 5: How To Use

    HOW TO USE 1. Adjust the iris and focus of the lens so that optimum image may be obtained. * Usable lenses CS-mount lenses, whose length "L" (in the illustration) from the bearing surface of the mount is 5mm or less if protruded, should be used.
  • Page 6 INT./EXT. SYNCHRONOUS CONTROL (a) Internal Synchronous Control CAMERA (b) External Synchronous Control by VBS The internal sync. mode automatically changes to the external sync. mode when the VBS signal from an external control unit is supplied to 'EXT. SYNC' of 12P terminal on the back of the camera.
  • Page 7 CAMERA CONTROLS ( OSD ) To set up the camera, use the SETUP screen displayed on your monitor TV. 1. SETUP OF EACH FUNCTION DISPLAY SHIFT SELECT (Back side of the camera) 1. Press the DISPLAY button on the back side of the camera to display the SETUP screen on your monitor TV.
  • Page 8 2. CAMERA CHARACTER (CHR) (Factory setting is OFF.) (1) ON: You can display up to 7 characters. The blinking character is the one currently selected. Each time you press the DATA button, the character changes in the order listed in the following table. Press the DISPLAY button to move the blinking mode to the next character, and you can select it by pressing the DATA buttons.
  • Page 9 3. WHITE BALANCE (WB) Allows you to make the white balance adjustment automatically or manually, for a color temperature range 2900K - 8000K. (Factory setting is AUTO.) (1) AUTO: Sets the automatic color temperature tracking mode. White balance may not be adjusted if the lighting conditions are bad.
  • Page 10 5. SHUTTER (SHUT) Select either manual or automatic selection of the electronic shutter. (Factory setting is OFF.) (1) OFF: Factory setting (1/60 sec) (2) AUTO: Automatically selects the electronic shutter. (3) HS1: You can select among the 8 shutter speeds. Choose one from: 1/100 1/125 1/250 1/500 1/1,000 1/2,000 1/4,000 and 1/10,000 sec.
  • Page 11 6. BACKLIGHT CORRECTION (BLC) Backlight correction prevents the object from becoming dark when there is a strong light (such as spotlight) in the background. (Factory setting is OFF.) (1) OFF: Factory setting (2) AUTO: Depending on the position of the object in the screen, Area 0, Area 1, or Area 2 will automatically be selected.
  • Page 12 7. SYNC (SYNC) (Factory setting is H.PH) (1) H.PH: Allows you to make horizontal phase adjustment during external sync. Use the dual- trace oscilloscope to observe the waveform of external sync signal and of the picture output signal from the camera and then use the DATA (UP or DOWN) buttons to make an adjustment so that the phases will match.
  • Page 13 The following functions work regardless of the white balance mode: (5) R GAIN: Adjusts the depth of red. (6) B GAIN: Adjusts the depth of blue. (7) R.PH: Adjusts the tone of red. (8) B.PH: Adjusts the tone of blue. (9) VH.AP: Adjusts the aperture level.
  • Page 14 9. COMMUNICATION (COM) Don't use this function in this camera model. 10. END (END) To finish the setup operations, press SHIFT and enter into the END mode. (1) MEMORY: Saves the settings and disappers from the setup screen. (2) CLEAR: Resets all settings to the factory values and disappers from the setup screen.

  • Page 15: Specifications

    30% ~ 90% Dimensions 60 (W) x 60 (H) x 140 (D)mm (2.4 x 2.4 x 5.5 inches) Weight 410grm (0.9lbs) Note: Weight and dimensions are approximate. Design and specifications are subject to change without prior notice. HC7501 - 14 -...
  • Page 16 * The socket-outlet should be installed near the equipment and should be easily accessible. ELMO CO., LTD. OVERSEAS SUBSIDIARY COMPANIES ELMO Mfg. Corp. ELMO Canada Mfg. Corp. 1478 Old Country Road, 44 West Drive, Brampton, Plainview, NY 11803-5034 Ontario, L6T 3T6, U.S.A.

Table of Contents