Bosch GLI18V-300 Operating/Safety Instructions Manual page 7

2610047949 07-17 GLI18V-300_GLI18V-300 7/10/17 1:28 PM Page 7
INSERTING AND RELEASING
BATTERY PACK
To insert battery: align and slide battery pack
into worklight until it locks into position (an
audible click sound is an indication that the
battery is locked) (Fig. 2). Do not force.
To remove the battery pack: press the battery
pack release button and slide the battery pack
completely out of worklight housing.
PROTECTION AGAINST DEEP
DISCHARGING
The lithium ion battery is protected against
deep discharging by the "Electronic Cell
Protection (ECP)". When the battery is
empty, the cordless worklight is switched off
by means of a protective circuit.
TURNING THE WORKLIGHT ON
To turn the worklight ON, press the On/Off
switch. To turn worklight OFF, press the
On/Off switch (Fig. 1).
after the cordless worklight has been
automatically switched off. The battery can
be damaged.
FIG. 3
200°
Assembly
Operating Instructions
Do not continue to
press the On/Off switch
180°
135°
90°
48,5
FIG. 2
BATTERY PACK
RELEASE
BUTTON
BATTERY
PACK
RUN TIME
The run time will depend - in part - on the
Bosch battery capacity.
Battery Ah
2.0 Ah
4.0 Ah
5.0 Ah
6.0 Ah
6.3 Ah
POSITIONING THE WORKLIGHT
The lamp head can be swivelled to any of 6
stages to suit the lighting application. (Fig. 3).
It can also be hung using the utility hook
(Fig. 4).
FIG. 4
-7-
Run Time Up To
10 Hours
20 Hours
25 Hours
30 Hours
31.5 Hours