Quick User Guide; Controls And Programmes - Candy H10A2TCEX-S Manual

7. QUICK USER GUIDE

1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. Gently close the door pushing it slowly
until you hear the door 'click' shut.
3. Select the desired drying programme by
turning the programme knob or, in some
models, by pressing the specific button
(check the programme table for specific
details).
4. Press the programme start button. The
dryer will start automatically.
5. If the door is opened during the
programme to check the laundry, it is
necessary to press programme start
to recommence drying after the door
has been closed.
6. When the cycle is nearing completion
the machine will enter the cool down
phase, the clothes will be tumbled in
cool air allowing the load to cool down.
7. Following the completion of the cycle
the drum will rotate intermittently to
minimize creasing. This will continue
until the machine is switched OFF or the
door is opened.
Do not open the door during the
automatic programmes in order to
obtain a proper drying.
Technical data
Power input / Power current fuse amp/
Supply voltage: see rating plate.
Maximum load: see energy label.
Energy class: see energy label.
8. CONTROLS AND
PROGRAMMES
H
E
A PROGRAMME SELECTOR with
OFF position
B START/PAUSE button
C DELAY START button
D TIME CYCLE SELECTION button
E MEMO button
F DRYING SELECTION button
G EASY IRON button
H DISPLAY
D+F CHILD LOCK
71
A
B
C
D
F
G