Table of Contents
Advertisement
English
– Vibration level a
measured according to
hv
ISO 22867
– Control handle: < 5.9 m/s²
– Loop handle: 6.4 m/s²
Information on compliance with Vibration Direc‐
tive 2002/44/EC is available at www.stihl.com/
vib.
15.4
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
16 Combinations with Power‐
heads
16.1
STIHL RG
The attachment may be mounted to the following
powerheads:
– STIHL FS 91
– STIHL FS 91 R
– STIHL FS 94
– STIHL FS 94 R
– STIHL FS 111
– STIHL FS 111 R
– STIHL FS 131
– STIHL FS 131 R
17 Spare Parts and Accesso‐
ries
17.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
18 Disposal
18.1
Disposing of Attachment
Information on disposal is available from STIHL
servicing dealers.
10
16 Combinations with Powerheads
► Dispose of the attachment, blades, accesso‐
ries and packaging in accordance with local
regulations and environmental requirements.
19 EC Declaration of Con‐
formity
19.1
STIHL RG Interchangeable
Attachment
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Weeder attachment
– Manufacturer's brand: STIHL
– Model: RG
– Serial number: 4180
conforms to the relevant provisions of Directive
2006/42/EC and has been developed and manu‐
factured in conjunction with the attachment
motors listed in this instruction manual to comply
with the following standards in the versions valid
on the date of production: EN ISO 12100.
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture is specified on the
attachment.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Head of Product Data,
Regulations and Licensing
0458-810-0121-B
Advertisement
Table of Contents
